Lubricating oil
| Product name | Product profile |
Product performance |
Base oil |
Additive type |
Typical viscosity at 40 ℃ |
Viscosity index |
Working temperature upper limit under normal working conditions |
Application |
| Alpha SP | Mineral gear oil | ★ | mineral oil |
Extreme pressure / antiwear |
46 - 1000 | 95 | 71℃/160°F | High load capacity, good resistance to oxidation, corrosion, foaming, micropitting and abrasion |
| Hyspin HLP | Ashless hydraulic oil | ★★ | Mineral oil |
Antiwear / anticorrosion |
32 - 150 | >100 | 82℃/180°F | Ashless antiwear hydraulic and circulating oils. Good anti-oxidation stability, excellent anti-wear and corrosion resistance. Meet the requirements of DIN 51525 (Part2) "HL-P Type hydraulic fluid" |
| Anvol WG 46 | Water-ethylene glycol fire-proof hydraulic oil | ★★ | Water-glycol | antiwear | 46 | >200 | 50℃/122°F | Mainly used in metallurgical industry, recommended for coal mining where higher water is needed for safety |
| Anvol SWX |
Polyol ester fire resistant hydraulic oil |
★★★ | Polyol ester | antiwear | 46,68 | 180 | 270℃/519°F | Hydraulic fluid certified by the American Fire Protection Association. Suitable for hydraulic system with combustion danger in case of oil leakage, and not suitable for water-based hydraulic fluid due to temperature limitation or other reasons, such as metallurgical equipment (continuous casting, furnace door) and die casting industry, etc. |
| Magna SW | Machine tool guideway oil | ★ | Mineral oil |
Extreme pressure / antiwear |
32,68,220 | >95 | 90℃/200°F | |
| Aircol MR | Mineral based compressor oil | ★ | Mineral oil | antiwear | 32 - 68 | 97 | Depending on the compressor. | Suitable for continuous operation, air discharge temperature up to 90 ℃ oil-immersed lubrication and oil-lubricated screw compressor. This product is designed to meet the requirements of 4000 hours oil change cycle |
ProductnameProduct profileProduct performanceBase oilAdditive typeTypical viscosity at 40 ℃Viscosity indexWorking temperature upper limit under normal working conditionsApplicationAlpha SPMineral gear oil★mineral oilExtreme pressure / antiwear46 - 10009571℃/160°FHigh load capacity, good resistance to oxidation, corrosion, foaming, micropitting and abrasionHyspin HLPAshless hydraulic oil★★Mineral oilAntiwear / anticorrosion32 - 150>10082℃/180°FAshless antiwear hydraulic and circulating oils. Good anti-oxidation stability, excellent anti-wear and corrosion resistance. Meet the requirements of DIN 51525 (Part2) "HL-P Type hydraulic fluid"Anvol WG 46Water-ethylene glycol fire-proof hydraulic oil★★Water-glycolantiwear46>20050℃/122°FMainly used in metallurgical industry, recommended for coal mining where higher water is needed for safetyAnvol SWXPolyol ester fire resistant hydraulic oil★★★Polyolesterantiwear46,68180270℃/519°FHydraulic fluid certified by the American Fire Protection Association. Suitable for hydraulic system with combustion danger in case of oil leakage, and not suitable for water-based hydraulic fluid due to temperature limitation or other reasons, such as metallurgical equipment (continuous casting, furnace door) and die casting industry, etc.Magna SWMachine tool guideway oil★Mineral oilExtreme pressure / antiwear32,68,220>9590℃/200°F Aircol MRMineral based compressor oil★Mineral oilantiwear32 - 6897Depending on the compressor.Suitable for continuous operation, air discharge temperature up to 90 ℃ oil-immersed lubrication and oil-lubricated screw compressor. This product is designed to meet the requirements of 4000 hours oil change cycle
SERVICE HOTLINE
GENERAL Wechart
Mobile Website
About Us | Sitemap | Legal Statement | Contact Us | Email